Dura Auto-Batch™ Direct Injection System

The Dura Auto-Batch™ Direct Injection System works by direct injecting herbicides into the carrier flow while filling the sprayer.   

Don’t mortgage the farm to automate your filling process!  Just upgrade your current 2″ or 3″ system.

The Dura Auto-Batch™ Direct Injection sprayer filling system is the most cost-effective sprayer loading system on the market.  This chemical handling system reduces sprayer load time by up to 80%.  The system is automated, so the operator can multi-task.  It provides recirculation, so it maximizes chemical performance.  It simultaneously direct injects chemicals and is a closed fill system, reducing operator exposure to chemicals.  The Dura Auto-Batch™ Direct Injection gives you a high return on your investment by maximizing the capacity of your existing equipment and reducing labor and machinery costs. 

By optimizing loading efficiency for narrow application windows, you can get a return on your investment in less than 9 spraying days.  In fact, the folks over at Sprayers101.com built a model to test the benefits of all of the elements of a spray operation that effect productivity.  They found that decreasing sprayer loading time was the winner as far as increasing on-field spraying time.  Read the article here.

Calculate your Return on Investment here:  http://duraproducts.com/di-direct-injection-roi/

Example fill – 1,000 gallon batch size:  Filled in less than 5 1/2 minutes with 2″ plumbing

• 37.5 gallons of  SureStart
• 3.75 gallons Atrazine
• 25.0 gallons of Glyphosate
• 12.5 gallons of 2,4-D

How it Works

1. Turn meter screen on by pressing any button, the “Power” light will be on if connected to power.
2. Press Auto
3. Set Amount
4. Press Start (this puts meter into Auto-Batch mode, “Run” light will come on)
5. The pump will begin to dispense fluid & automatically shuts off when complete

---

The below part numbers are for ordering 1-4 pump systems that are unassembled.

Part number	QTY	Description
DPABS-6318**	1-4	Dura Auto-Batch™ Direct Injection Pump
Dura ABS DI 2″ Kit or Dura ABS DI 3″ Kit	1-4 (1 per Dura ABS)	2″ Accessory Kit or 3″ Accessory Kit
Dura ABS DI 2″ Gauge Kit or Dura ABS DI 3″ Gauge Kit	1	2″ Gauge Kit or 3″ Gauge Kit
DP-P4040 DI	1	Dura Auto-Batch™ Direct Injection Frame

---

The below part numbers are for 4 pump systems fully assembled.

Part number	Description
DPAB-DI2V-12	2″ Plumbed AB Direct Injection System 12V Viton® 4 Pump
DPAB-DI2E-12	2″ Plumbed AB Direct Injection System 12V EPDM 4 Pump
DPAB-DI3V-12	3″ Plumbed AB Direct Injection System 12V Viton® 4 Pump
DPAB-DI3E-12	3″ Plumbed AB Direct Injection System 12V EPDM 4 Pump
DPAB-DI2V-110	2″ Plumbed AB Direct Injection System 110V Viton® 4 Pump
DPAB-DI2E-110	2″ Plumbed AB Direct Injection System 110V EPDM 4 Pump
DPAB-DI3V-110	3″ Plumbed AB Direct Injection System 110V Viton® 4 Pump
DPAB-DI3E-110	3″ Plumbed AB Direct Injection System 110V EPDM 4 Pump

• Always turn pump off and disconnect system from power when unused.
• Never leave unattended while in use.
• Make sure to close manual valves at the bottom of the system when not in use.